3D print metal more affordably than ever before.

17-4 PH Stainless Steel

3D print metal more affordably than ever before.
Scroll down

Near wrought strength

3D printed 17-4 PH stainless steel exceeds MIM standards and reaches 95% wrought strength under equal heat treatment.
Metal

17-4 PH Stainless Steel

As sintered
1050
MPa
Heat treated
1250
MPa
Metal

17-4 PH Stainless Steel

As sintered
30
HRC
Heat treated
36
HRC
Metal

17-4 PH Stainless Steel

As sintered
30
HRC
Heat treated
36
HRC
17-4 PH Stainless Steel

When To Print With 17-4 PH Stainless Steel

17-4 PH Stainless Steel is a hard, stiff, and corrosion resistant stainless steel. It excels in manufacturing environments and as low volume parts.
Low volume production
Replacement parts
Complex geometries
Corrosion resistant parts

Stanley Black & Decker

Stanley Black & Decker tested three identical parts printed on the Metal X. These parts proved durable through tens of thousands of cycles and strong enough to handle significant compressive load while also being 53% lighter.
17-4 PH Stainless Steel

Working with 17-4 PH Stainless Steel

17-4 PH Stainless steel is best heat treated to maximize strength, hardness, or toughness. H900 condition, heating your part to 900F (482C) for four hours, yields the strongest and hardest possible parts. H1150 condition (1150F instead of 900F) can also be used to maximize toughness at the expense of ultimate tensile strength.

Compatible with our Metal X system.
Learn more
|